Ripplet Earrings by Elsiem

Earrings
by Elsiem

Ripplet Small Earrings

3D Printed Earrings with sterling silver ear posts and push on backs. Beautifully sculpted organic wavy shaped hoop earrings, the Ripplet earrings are lightweight, tactile, durable with an edgy look and so comfortable to wear.

These earrings have been CAD designed in house and 3D printed in a great durable, flexible material called SLS Nylon. Its then be in a vibro polishing tumbler to slightly smooth the surface but leaving an almost leather look texture – coloured in a matt black with a skin safe dye.

Earrings measure approx 20mm x 22mm x 14mm

Features

  • Primary Material : 3D Printed Nylon
  • Length (mm) : 22
  • Fitting Type : Post
  • Dimensions (mm) : 20x22x14
  • One of a Kind : No
  • Hallmarked : No
  • Wire Material : Sterling Silver

Cleaning Instructions

Whilst SLS Nylon is a fairly robust material, it can mark if scratched abrasively and isn’t unbreakable if due care is not taken. It has been dyed with a fabric dye which is penetrated approximately 2/3mm into the Nylon, however it is advisable to keep it away from any chemicals including household cleaning products or any skin products. Clean gently with a damp soft cloth and let dry naturally.

Purchase

Ripplet Earrings

Features

  • Primary Material : 3D Printed Nylon
  • Length (mm) : 22
  • Fitting Type : Post
  • Dimensions (mm) : 20x22x14
  • One of a Kind : No
  • Hallmarked : No
  • Wire Material : Sterling Silver

 Availability

For immediate dispatch NB: These earrings are non-returnable.

Earrings
by Elsiem

Ripplet Small Earrings

3D Printed Earrings with sterling silver ear posts and push on backs. Beautifully sculpted organic wavy shaped hoop earrings, the Ripplet earrings are lightweight, tactile, durable with an edgy look and so comfortable to wear.

These earrings have been CAD designed in house and 3D printed in a great durable, flexible material called SLS Nylon. Its then be in a vibro polishing tumbler to slightly smooth the surface but leaving an almost leather look texture – coloured in a matt black with a skin safe dye.

Earrings measure approx 20mm x 22mm x 14mm

Features

  • Primary Material : 3D Printed Nylon
  • Length (mm) : 22
  • Fitting Type : Post
  • Dimensions (mm) : 20x22x14
  • One of a Kind : No
  • Hallmarked : No
  • Wire Material : Sterling Silver

Cleaning Instructions

Whilst SLS Nylon is a fairly robust material, it can mark if scratched abrasively and isn’t unbreakable if due care is not taken. It has been dyed with a fabric dye which is penetrated approximately 2/3mm into the Nylon, however it is advisable to keep it away from any chemicals including household cleaning products or any skin products. Clean gently with a damp soft cloth and let dry naturally.